Assessing HCH isomer uptake in Alnus glutinosa: implications for phytoremediation and microbial response.

Although the pesticide hexachlorocyclohexane (HCH) and its isomers have long been banned, their presence in the environment is still reported worldwide. In this study, we investigated the bioaccumulation potential of α, ß, and δ hexachlorocyclohexane (HCH) isomers in black alder saplings (Alnus glutinosa) to assess their environmental impact. Each isomer, at a concentration of 50 mg/kg, was individually mixed with soil, and triplicate setups, including a control without HCH, were monitored for three months with access to water. Gas chromatography-mass spectrometry revealed the highest concentrations of HCH isomers in roots, decreasing towards branches and leaves, with δ-HCH exhibiting the highest uptake (roots-14.7 µg/g, trunk-7.2 µg/g, branches-1.53 µg/g, leaves-1.88 µg/g). Interestingly, α-HCH was detected in high concentrations in ß-HCH polluted soil. Phytohormone analysis indicated altered cytokinin, jasmonate, abscisate, and gibberellin levels in A. glutinosa in response to HCH contamination. In addition, amplicon 16S rRNA sequencing was used to study the rhizosphere and soil microbial community. While rhizosphere microbial populations were generally similar in all HCH isomer samples, Pseudomonas spp. decreased across all HCH-amended samples, and Tomentella dominated in ß-HCH and control rhizosphere samples but was lowest in δ-HCH samples.

Survivability and proliferation of microorganisms in bentonite with implication to radioactive waste geological disposal: strong effect of temperature and negligible effect of pressure.

As bentonite hosts a diverse spectrum of indigenous microorganisms with the potential to influence the long-term stability of deep geological repositories, it is essential to understand the factors influencing microbial activity under repository conditions. Here, we focus on two factors, i.e., temperature and swelling pressure, using a suspension of Cerny Vrch bentonite to boost microbial activity and evaluate microbial response. Suspensions were exposed either to different pressures (10, 12 and 15 MPa; to simulate the effect of swelling pressure) or elevated temperatures (60, 70, 80 and 90 °C; to simulate the effect of cannister heating) for four weeks. Each treatment was followed by a period of anaerobic incubation at atmospheric pressure/laboratory temperature to assess microbial recovery after treatment. Microbial load and community structure were then estimated using molecular-genetic methods, with presence of living cells confirmed through microscopic analysis. Our study demonstrated that discrete application of pressure did not influence on overall microbial activity or proliferation, implying that pressure evolution during bentonite swelling is not the critical factor responsible for microbial suppression in saturated bentonites. However, pressure treatment caused significant shifts in microbial community structure. We also demonstrated that microbial activity decreased with increasing temperature, and that heat treatment strongly influenced bentonite microbial community structure, with several thermophilic taxa identified. A temperature of 90 °C proved to be limiting for microbial activity and proliferation in all bentonite suspensions. Our study emphasizes the crucial role of a deep understanding of microbial activity under repository-relevant conditions in identifying possible strategies to mitigate the microbial potential within the deep geological repository and increase its long-term stability and safety.

Biodiversity in wetland+ system: a passive solution for HCH dump effluents.

The hexachlorocyclohexane isomers (HCH) are long-banned pesticides. Even though their use has been prohibited for decades, their presence in the environment is still reported worldwide. Wetland + is a registered trademark of the remedial treatment technology consisting of an aerobic sedimentary tank, a permeable reactive barrier, a biosorption system, and an aerobic wetland. This proven method combines a reductive treatment known from PRBs with the natural wetland self-cleaning processes. The average efficiency of the system is 96.8% for chlorobenzenes (ClB) and 81.7% for HCH, during the first 12 months of the system operation. The presence of the genes encoding enzymes involved in the degradation of the HCH compounds indicates that the removal of HCH and ClB occurs not only by chemical removal but also through aerobic and anaerobic combining biodegradation. Changes in abundance and the composition of the diatom community were found to be suitable indicators of the water quality and of the impact of the Wetland + operation on the water ecosystem. The system's annual operation exhibited a markedly higher number of diatom species in the closing profiles of the Ostrovský Creek, the Wetland + effluent recipient.

Early stage biofilm formation on bio-based microplastics in a freshwater reservoir.

Bio-based plastics (BP) produced from renewable biomass resources, such as high-density polyethylene (HDPE), polylactic acid (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), is currently increasing in terms of both products and applications. However, their biodegradability and environmental fate are not yet fully understood, especially in freshwaters. Here, we present the results of an in-situ study in a freshwater reservoir, where we submerged HDPE, PLA and PHBV microscale BP (mBP) in dialysis bags to enable exchange of small organic and inorganic molecules, including nutrients, with the surrounding water. After one and two months, the bacterial biofilm that formed on each mBP was characterised by 16S rRNA amplicon sequencing. After two-months, Oxalobacteraceae, Pedosphaeraceae, Flavobacteriaceae (Flavobacterium) and Chitinophagaceae (Ferruginibacter) had increased by up to four times. Both these and other common members (≥1 % relative total biomass) of the microbial community were similarly abundant on all mBP. Low-abundance (0.3-1 %) bacterial taxa, however, were significantly more diverse and differed on each mBP. Notably, some low-abundance families and genera increased on specific materials, e.g. Sphingomonadaceae on HDPE, Sphingobacteriaceae on PHBV, Gemmatimonas and Crenothrix on PLA. Overall, abundant bacteria were regarded as a pioneering community, while low-abundance bacteria were more diverse and preferred mBP types in the early stages of biofilm formation on mBP. It could be influenced by the environmental conditions, where nutrient levels and low temperatures might shape the low-abundance of attached bacterial communities than the plastic material itself.

Field application of glycerol to enhance reductive dechlorination of chlorinated ethenes and its impact on microbial community.

Chlorinated ethenes (CEs) are common and persistent contaminants of soil and groundwater. Their degradation is mostly driven by a process of bacterial reductive dechlorination (also called organohalide respiration) in anaerobic conditions. This study summarizes the outcomes of the long-term in-situ application of glycerol for the enhanced reductive dechlorination of CEs on a highly contaminated site. Glycerol injection resulted in an almost immediate increase in the abundance of fermentative Firmicutes, which produce essential sources of carbon (acetate) and electrons (H2) for organohalide-respiring bacteria (OHRB) and change groundwater conditions to be suitable for OHRB growth. The decreased redox potential of groundwater promoted also the proliferation of sulfate-reducing bacteria, which compete for electron donors with OHRB but at the same time support their growth by producing essential corrinoids and acetate. A considerable increase in the abundance of OHRB Dehalococcoides, concurrently with vinyl chloride (VC) reductase gene levels, was revealed by real time polymerase chain reaction (qPCR) method. Consistent with the shifts in bacterial populations, the concentrations of pollutants tetrachloroethylene and trichloroethylene decreased during the monitoring period, with rising levels of cis-1,2-dichloroethylene, VC, and most importantly, the final CE degradation products: ethene and ethane. Our study implies the importance of syntrophic bacterial interactions for successful and complete CE degradation and evaluates glycerol as convenient substrate to enhance reductive dechlorination and as an effective source of electrons for OHRB.